A recent installation of a Fujitsu AUTG18 6.0kw ceiling cassette heat pump/air conditioner in the central office of a Greenlane based business. Pipes and cables were run from the ceiling down a central cupboard, and through the floor to the basement area, and then through the brick wall to the outdoor unit. We also installed 3 Fujitsu ASTG09LUCA 3.4kw heat pumps into 3 separate offices.
We installed this Fujitsu ASTG09LUCA 3.4kw into the 2nd storey of a 2 level home that was converted to offices in Epsom. The outdoor unit was mounted on the courtyard below
We installed this Fujitsu ASTG18LUCA 6.0kw heat pump into the main lounge for a customer in Whangaparaoa. The outdoor unit is mounted on a polyslab base to provide a firm and level platform for the unit which will not allow weeds to interfere with the unit.
We installed this Fujitsu ASTG14LUCA 5.4kw to cool an upstairs large home office in Albany. The outdoor unit was mounted on an anti-vibration wall bracket as the customer did not want it on the BBQ area below.
This customer chose us to install 2 x ASTG09LUCA 3.4kw heat pumps. One unit was a standard installation, the other was installed on an internal wall, with pipes and cables run through the ceiling to connect the units. A condensation pump was installed, and both outdoor units were mounted approx. 100mm above ground level as the area was prone to slight flooding.
We installed this Fujitsu ASTG24LFCB 8.0kw heat pump into our customers lounge. The 8kw unit was needed as the lounge was medium-larege size and also had a lot of large windows contributing to heat loss.
We installed 2 x ASTG12LVCB 4.8kw heat pump into this home in Glen Eden, West Auckland. One was for the customers medium sized lounge, the other was for the rumpus room.
We installed 2 x ASTG09LUCA 3.4kw heat pumps, and 1 x ASTG18LUCA 6.0kw heat pumps into this home in Milford. The customer requested all the outdoor units together on one side of the house, so as not to interfere with parking for the boat on the other side.